Apache Flume – Configuration

apache flume configuration

Here we will discuss about apache flume configuration. After installing Flume, we need to configure it using the configuration file which is a Java property file having key-value pairs. We need to pass values to the keys in the file.

In the Flume configuration file, we need to −

  • Name the components of the current agent.
  • Describe/Configure the source.
  • Describe/Configure the sink.
  • Describe/Configure the channel.
  • Bind the source and the sink to the channel.

Usually we can have multiple agents in Flume. We can differentiate each agent by using a unique name. And using this name, we have to configure each agent.

Naming the Components

First of all, you need to name/list the components such as sources, sinks, and the channels of the agent, as shown below.

agent_name.sources = source_name 
agent_name.sinks = sink_name 
agent_name.channels = channel_name 

Flume supports various sources, sinks, and channels. They are listed in the table given below.

SourcesChannelsSinks
Avro SourceThrift SourceExec SourceJMS SourceSpooling Directory SourceTwitter 1% firehose SourceKafka SourceNetCat SourceSequence Generator SourceSyslog SourcesSyslog TCP SourceMultiport Syslog TCP SourceSyslog UDP SourceHTTP SourceStress SourceLegacy SourcesThrift Legacy SourceCustom SourceScribe SourceMemory ChannelJDBC ChannelKafka ChannelFile ChannelSpillable Memory ChannelPseudo Transaction ChannelHDFS SinkHive SinkLogger SinkAvro SinkThrift SinkIRC SinkFile Roll SinkNull SinkHBaseSinkAsyncHBaseSinkMorphlineSolrSinkElasticSearchSinkKite Dataset SinkKafka Sink

You can use any of them. For example, if you are transferring Twitter data using Twitter source through a memory channel to an HDFS sink, and the agent name id TwitterAgent, then

TwitterAgent.sources = Twitter 
TwitterAgent.channels = MemChannel 
TwitterAgent.sinks = HDFS 

After listing the components of the agent, you have to describe the source(s), sink(s), and channel(s) by providing values to their properties.

Describing the Source

Each source will have a separate list of properties. The property named “type” is common to every source, and it is used to specify the type of the source we are using.

Along with the property “type”, it is needed to provide the values of all the required properties of a particular source to configure it, as shown below.

agent_name.sources. source_name.type = value 
agent_name.sources. source_name.property2 = value 
agent_name.sources. source_name.property3 = value 

For example, if we consider the twitter source, following are the properties to which we must provide values to configure it.

TwitterAgent.sources.Twitter.type = Twitter (type name) 
TwitterAgent.sources.Twitter.consumerKey =  
TwitterAgent.sources.Twitter.consumerSecret = 
TwitterAgent.sources.Twitter.accessToken =   
TwitterAgent.sources.Twitter.accessTokenSecret = 

Describing the Sink

Just like the source, each sink will have a separate list of properties. The property named “type” is common to every sink, and it is used to specify the type of the sink we are using. Along with the property “type”, it is needed to provide values to all the required properties of a particular sink to configure it, as shown below.

agent_name.sinks. sink_name.type = value 
agent_name.sinks. sink_name.property2 = value 
agent_name.sinks. sink_name.property3 = value

For example, if we consider HDFS sink, following are the properties to which we must provide values to configure it.

TwitterAgent.sinks.HDFS.type = hdfs (type name)  
TwitterAgent.sinks.HDFS.hdfs.path = HDFS directory’s Path to store the data

Describing the Channel

Flume provides various channels to transfer data between sources and sinks. Therefore, along with the sources and the channels, it is needed to describe the channel used in the agent.

To describe each channel, you need to set the required properties, as shown below.

agent_name.channels.channel_name.type = value 
agent_name.channels.channel_name. property2 = value 
agent_name.channels.channel_name. property3 = value 

For example, if we consider memory channel, following are the properties to which we must provide values to configure it.

TwitterAgent.channels.MemChannel.type = memory (type name)

Binding the Source and the Sink to the Channel

Since the channels connect the sources and sinks, it is required to bind both of them to the channel, as shown below.

agent_name.sources.source_name.channels = channel_name 
agent_name.sinks.sink_name.channels = channel_name 

The following example shows how to bind the sources and the sinks to a channel. Here, we consider twitter source, memory channel, and HDFS sink.

TwitterAgent.sources.Twitter.channels = MemChannel
TwitterAgent.sinks.HDFS.channels = MemChannel 

Starting a Flume Agent

After configuration, we have to start the Flume agent. It is done as follows −

$ bin/flume-ng agent --conf ./conf/ -f conf/twitter.conf 
Dflume.root.logger=DEBUG,console -n TwitterAgent 

where −

  • agent − Command to start the Flume agent
  • –conf ,-c<conf> − Use configuration file in the conf directory
  • -f<file> − Specifies a config file path, if missing
  • –name, -n <name> − Name of the twitter agent
  • -D property =value − Sets a Java system property value.

Next Topic : Click Here

This Post Has One Comment

Leave a Reply